C403, No. 8 Xiyuan 9th Road, Xihu District, Hangzhou City, Zhejiang Province market@idtdisplay.com

Innolux G156HCE-LN1 15.6" FHD LCD Panel | LVDS | IDT Display

Innolux G156HCE-LN1 15.6inch FHD IPS LCD
Innolux G156HCE-LN1 15.6inch FHD IPS LCD
  • Innolux G156HCE-LN1 15.6inch FHD IPS LCD
  • Innolux G156HCE-LN1 15.6inch FHD IPS LCD

Innolux G156HCE-LN1 15.6" FHD LCD Panel | LVDS | IDT Display

Innolux G156HCE-LN1 is a 15 6-inch Full HD industrial LCD panel with 1920 × 1080 resolution, an LVDS interface and 350 cd m² typical brightness The specified operating ambient temperature range is -20°C to +70°C, subject to the manufacturer s thermal conditions Contact IDT Display for the datasheet, compatibility checks and a quotation

Model G156HCE-LN1
Brand Chimei Innolux
Size 15.6inch
Resolution 1920*1080
Brightness 350 cd/m² (Typ.)
Perspective 89/89/89/89
Interface LVDS
Operating Temp -20 ~ 70 °C
Production State In Production

Innolux G156HCE-LN1 15.6-Inch Full HD Industrial LCD Panel

The Innolux G156HCE-LN1 is a 15.6-inch TFT LCD module with 1920 × 1080 Full HD resolution, LED backlighting and a 40-pin, dual-channel LVDS interface. It supports 16.7 million colors and features an anti-glare surface with a 3H hard coating.

With a typical brightness of 350 cd/m² and wide viewing angles, this panel can be considered for factory display systems, TFT LCD monitors and amusement equipment. Final suitability depends on the complete system design, interface compatibility and operating conditions.

Contact IDT Display for the datasheet, model availability, integration requirements and a quotation.

Key Features

  • 15.6-inch display with 1920 × 1080 Full HD resolution.

  • 350 cd/m² typical center luminance.

  • 40-pin, dual-channel LVDS interface.

  • 16.7 million display colors.

  • Normally black display mode.

  • Anti-glare surface with a 3H hard coating.

  • LED backlight driver integrated into the module PCBA.

  • RoHS compliance stated in the referenced manufacturer specification.

Technical Specifications

ParameterSpecification
ManufacturerInnolux
ModelG156HCE-LN1
Display size15.6 inches
Display typea-Si TFT LCD module
Resolution1920 × 1080 pixels
Active area344.16 × 193.59 mm (H × V)
Pixel pitch0.17925 × 0.17925 mm
Pixel arrangementRGB vertical stripe
Display colors16.7 million
Display modeNormally black
Typical brightness350 cd/m²
Minimum brightness280 cd/m²
Typical contrast ratio800:1
Typical viewing angles89° left / 89° right / 89° up / 89° down, at CR ≥ 10
Typical response time14 ms rise / 11 ms fall
Signal interfaceDual-channel LVDS, 40 pins
LCD module supply voltage5.0 V typical; specified range 4.5–5.5 V
Surface treatmentAnti-glare, hard coating (3H)
BacklightLED, with integrated driver
Operating ambient temperature-20°C to +70°C, subject to manufacturer conditions
Storage temperature-30°C to +70°C

Optical values are specified under the manufacturer's test conditions. Typical values are reference values and should not be treated as guaranteed minimum or maximum limits.

The 5.0 V value above applies to the LCD module supply. Confirm the backlight power requirements, connector pin assignments and power sequencing separately before integration.

Temperature and Thermal Design

The referenced manufacturer specification lists an operating ambient temperature range of -20°C to +70°C and a storage temperature range of -30°C to +70°C in Section 2.1, “Absolute Ratings of Environment.”

These ranges must be read together with the manufacturer's humidity, condensation and panel surface temperature conditions. The specification states that the active-area surface temperature must not exceed 70°C under any operating ambient temperature condition.

Check the complete thermal requirements before using the panel in an enclosed system or near a heat source. Ambient temperature alone does not establish that the finished display assembly will operate reliably.

Applications and Selection Considerations

The manufacturer lists TFT LCD monitors, factory applications and amusement equipment as intended application categories.

Factory Display Systems

The Full HD resolution can support detailed control interfaces, equipment status screens and production information displays. Confirm controller compatibility, enclosure design and environmental requirements for the intended installation.

TFT LCD Monitors

The panel can be evaluated for integration into a monitor assembly using a compatible LVDS controller. It is a display module and requires suitable electronics, power supplies, cabling and mechanical support.

Amusement Equipment

The display can be considered for amusement interfaces and related equipment. Verify mounting, viewing conditions, operating hours and system requirements before selection.

Application examples do not imply that the panel or a completed assembly holds any particular medical, automotive, marine or other system-level certification.

Integration and Replacement Checks

Before ordering this panel for a new design or as a replacement, verify:

  • The full model number and any revision requirements.

  • Outline dimensions, mounting points and mechanical clearance.

  • Active area and the position of the display within the enclosure.

  • LVDS channel configuration, connector pinout and signal mapping.

  • LCD module and backlight power requirements.

  • Controller timing, firmware and power-on/off sequencing.

  • Cable routing and connector orientation.

  • Thermal conditions inside the finished assembly.

  • Touchscreen, cover glass and bonding requirements, if applicable.

Matching screen size and resolution does not establish replacement compatibility. A mechanically similar panel may use different electrical connections or operating requirements.

Datasheet and Quotation Requests

To help us review your requirements, please provide:

  • Required model: G156HCE-LN1.

  • Quantity for samples and production.

  • Required delivery date and destination.

  • Whether this is a new design or a replacement.

  • Existing panel model, controller board and cable details, where available.

  • Requirements for a touchscreen, controller board or other accessories.

Please contact IDT Display to confirm current availability, production status, lead time and the specification revision applicable to the supplied units.

Frequently Asked Questions

What is the resolution of the Innolux G156HCE-LN1?

The G156HCE-LN1 has a native resolution of 1920 × 1080 pixels, commonly referred to as Full HD or FHD.

Is the brightness 350 nits or 450 nits?

The supplied Innolux Version 1.0 specification lists a typical center luminance of 350 cd/m² and a minimum of 280 cd/m² under the stated test conditions. One nit equals one cd/m², so the typical brightness is also described as 350 nits. The referenced specification does not support a 450-nit typical brightness claim.

What are its operating and storage temperature ranges?

Section 2.1 of the referenced specification lists an operating ambient temperature range of -20°C to +70°C and a storage temperature range of -30°C to +70°C. These ratings are subject to the manufacturer's environmental and panel surface temperature conditions.

What interface does the G156HCE-LN1 use?

It uses a 40-pin, dual-channel LVDS interface. Confirm the exact pin assignments, signal mapping and controller timing against the datasheet before connecting it.

Does this panel connect directly to HDMI?

The panel's native interface is LVDS. Connecting an HDMI source requires a compatible controller board configured for this panel, together with suitable power supplies and cables.

What is the LCD module supply voltage?

The referenced specification gives a typical LCD module supply voltage of 5.0 V, with a specified range of 4.5–5.5 V. Backlight supply requirements must be checked separately. Do not use the old 3.3 V value previously shown in the product description.

Is a touchscreen included?

The G156HCE-LN1 specification describes the LCD module. Do not assume that a touchscreen is included. If touch input is required, provide your cover glass, touch technology, interface and installation requirements for a separate compatibility review.

Is it suitable for direct sunlight?

The panel has a typical brightness of 350 cd/m². This value alone does not establish direct-sunlight readability. Outdoor suitability also depends on reflections, cover glass, optical bonding, enclosure design and thermal management. Provide your lighting conditions before selecting a panel for outdoor use.

Can it replace another 15.6-inch Full HD LCD?

Possibly, but compatibility must be checked. Screen size and resolution are only part of the comparison. Outline dimensions, mounting, pinout, supply voltages, LVDS configuration, backlight requirements and timing must also match the intended system.

Is the G156HCE-LN1 currently in production or available from stock?

The referenced 2022 specification does not establish current production status or stock availability. Contact IDT Display with your required quantity and delivery date for confirmation.

Can I request a datasheet and sample quotation?

Yes. Send the full model number, quantity, application and required delivery date. Include controller and cable information if you need help reviewing integration compatibility.

Specification Reference

This product description is based on the supplied Innolux G156HCE-LN1 Product Specification, Version 1.0, dated 9 March 2022.

Confirm the applicable specification revision before purchase. Availability, accessories, production status and delivery terms are subject to confirmation for the specific order.


Related LCD Selection Guides

Before integrating the G156HCE-LN1 into a new design or evaluating it as a replacement, review these engineering guides:

Compare the complete model specification, including mechanical dimensions, pin assignment, timing, power and backlight requirements. Validate the panel in the intended system before approval.

Applications of the Innolux G156HCE-LN1

Factory Display Systems
The 15.6-inch Full HD panel can be considered for machine interfaces, equipment status screens and production information displays. Confirm controller compatibility, enclosure design and thermal requirements before integration.

TFT LCD Monitors
The G156HCE-LN1 can be integrated into a monitor assembly with a compatible dual-channel LVDS controller, suitable power supplies and correctly configured cables. It does not connect directly to HDMI.

Amusement Equipment
The panel can be evaluated for amusement interfaces and related display equipment. Check mounting dimensions, viewing conditions and system operating requirements before selection.

Integration Support
For a compatibility review, provide your application, existing panel model, controller board, cable details and required quantity. IDT Display can review requirements for the LCD panel and associated display components.

Selection Notes
Typical brightness is 350 cd/m². Direct-sunlight readability requires a separate assessment of reflections, cover glass and thermal conditions. Touchscreen requirements must also be confirmed separately.


Name*
Your E-Mail*
Message*
Innolux G156HCE-L01 15.6-inch FHD 450-nit LVDS LCD Panel Innolux G156HCE-E01 15.6-inch FHD 450-nit eDP LCD Panel

Related Products

Price: Contact for latest real-time quotation. Final pricing depends on quantity, specification, customization requirements and exchange rate. MOQ: 1 piece.

Request Latest Price

Request a Quote for Innolux G156HCE-LN1 15.6" FHD LCD Panel | LVDS | IDT Display

Contact us for the latest price. Pricing and availability vary based on quantity, specifications, customization requirements and exchange rates. MOQ: 1 piece.

Request a Quote